LG AN110B-JD - Manual (Page 26)

Function
26
Function
Video Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just example to help
with the Projector operation.
* If there is no input signal present, the Menu will not be displayed on the screen.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button and then use D , E button to select the menu.
2. Press the G button and then use D , E button to select a video item you
want to adjust.
3. Press the F , G button to adjust the screen condition as you want.
4. Press the A OK button to save.
< RGB mode >
< Video mode >
● Each adjustment of menu options will not affect other input source.
As required, re-adjust menu options for the following input source :
Video/S-Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i)
● To restore the original image condition after changing it, press A OK button
after selecting [Reset] item.
● In the broadcasting system NTSC, the picture item Tint is displayed and can
be adjusted.
● To exit the menu display, repeatedly, press the MENU button.
Adjusting Video
1. Press the MENU button and then use D , E button to select the menu.
2. Press the G button and then use D , E button to select APC item.
3. Press the G button and then use D , E button to adjust the screen
condition as you want.
4. Press the A OK button to save.
APC (Auto Picture Control)
* Use APC to set the projector for the best picture appearance.
* This function will not work in RGB mode.
● Each press of the D , E button changes the screen as shown below.
● To exit the menu display, repeatedly, press the MENU button.
Clear Soft User
Contrast 50
Brightness 50
Reset
Menu Prev.
Contrast 50 G
APC
Contrast 80
Brightness 50
Sharpness 50
Menu Prev.
APC G Clear
Soft
User
APC
Contrast 80
Brightness 50
Sharpness 50
Menu Prev.
APC G Clear
Soft
User