LG AN110B-JD - Manual (Page 22)

Connection
22
Connection
Connecting to a Desktop PC
* You can connect the projector to a computer that has VGA, SVGA, XGA and SXGA output.
* Refer to page 41 for the supported monitor displays of the projector.
< How to connect >
a. Connect computer cable to RGB Input (PC/DTV) of
the projector.
b. If the PC has HDMI output, connect HDMI to DVI
cable to HDMI Input of the projector.
* If connecting the HDMI, audio is not supported.
Connecting to a Notebook PC
< How to connect >
- Connect computer cable to RGB Input (PC/DTV) of
the projector.
* If you set your computer, such as a notebook type
IBM PC/AT compatible, to output the signal to both
the display of your computer and the external
monitor, the picture of the external monitor may not
appear properly. In such cases, set the output
mode of your computer to output the signal only to
the external monitor. For details, refer to the
operating instructions supplied with your computer.
HDMI to DVI cable