Lifescan Pocket Scan Blood Glucose Monitor System - Manual (Page 78)

The messages that appear on your
OneTouch
® Profile ® Meter display will
guide you through the testing proce-
dure, alert you to problems as they
occur, and give you information about
test results stored in the meter’s mem-
ory. This section provides you with a
complete listing of the display mes-
sages, what they mean, and what to
do if there is a problem.
Test Procedure Messages
These messages appear during routine
testing. Follow them carefully and
they will guide you through the test.
71
MESSA
GES
SOLVING PROBLEMS
MESSAGE APPEARS WHEN
Appears briefly when the meter is turned on. This example shows that
all of the display segments are working properly.
code10 The meter is first turned on. The code number (1 – 16) must match the
(Example) code number on the test strip vial or be reset.
7:26am 7-01-00