Lowrance electronic Lowrance GlobalMap 5500C - Manual (Page 70)

64
Navigate a Route in Reverse
Here's how you run a route backwards, from the end waypoint to the
beginning waypoint.
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
,
press MENU | MENU | ↓ to R OUTE P LANNING
| ENT .
2. Press ↓ to select route name| ENT | ↓ to N AVIGATE
| → to R EVERSE
| ENT | ←
to N
AVIGATE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU | ↓ to C ANCEL N AVIGATION
| ENT | ← to Y ES
| ENT .
Navigating along a route: Fig. 1 shows the GlobalMap 4900M Naviga-
tion Page at the start of a route, heading straight for the first waypoint
(Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm
has been triggered and the bearing arrow on the compass rose has
turned to point east, toward Wpt 2. In Fig. 3 the traveler has turned
east on his new course and is heading straight for Wpt 2, which is 2.15
miles away. Fig. 4 shows route navigation on the Map Page. In this fig-
ure, the traveler has reached Wpt 2 and is half-way along the leg be-
tween Wpts 2 and 3.
Figure 4. Figure 3.
Figure 2. Figure 1.