Lowrance electronic Lowrance GlobalMap 5500C - Manual (Page 120)

114
Map Page showing results of a street search.
The cursor points to the located street.
If you want to navigate to the found street at the cursor location, just
press
MENU | ENT | EXIT .
Find an Intersection
You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. From the Map Page, press MENU | ↓ to F IND S TREETS
| ENT and the Find
Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press ENT
to display the Find By Name menu. There are two options: A. You can
spell out the street in the top selection box. Press ↑ or ↓ to change the
first letter, then press → to move the cursor to the next letter and re-
peat until the name is correct, then press ENT | ENT . B. Or you can jump
down to the lower box and pick a street from the selection list . Press
ENT , then press ↓ or ↑ to select a street from the list and press ENT .
3. The Find Streets menu reappears with the street you're searching for
in the First Street box.
4. Now fill in the second street. Press ↓ to S ECOND S TREET
| ENT and the
Find By Name menu appears again. Just like before, there are two op-
tions:
A. You can spell out the second street in the top selection box.
Press ↑ or ↓ to change the first letter, then press → to move the cursor
to the next letter and repeat until the name is correct, then press
ENT | ENT . B. Or you can jump down to the lower box and pick the sec-
ond street from the selection list . Press ENT , then press ↓ or ↑ to select a
street from the list and press ENT .
5. The Find Streets menu reappears with the first and second street
dialog boxes filled in. In this example, we selected 71st Street as our