Connecting external devices, Installing the server in a rack, Connecting – Lenovo 6434 User Manual
Page 68: External, Devices, Installing, Server, Rack
If
the
server
has
a
RAID
adapter
and
you
have
installed
or
removed
a
hard
disk
drive,
see
the
RAID
adapter
documentation
that
comes
with
the
server
for
information
about
reconfiguring
the
disk
arrays.
Connecting
external
devices
If
you
install
an
optional
adapter
that
the
server
supports,
you
can
attach
external
devices
to
the
server.
To
attach
an
external
device,
complete
the
following
steps:
1.
Read
the
safety
information
that
begins
on
page
and
the
documentation
that
comes
with
the
device.
2.
Turn
off
the
server
and
all
attached
devices.
3.
Follow
the
instructions
that
come
with
the
device
to
prepare
it
for
installation
and
to
connect
it
to
the
server.
Note:
If
you
are
attaching
an
external
device,
see
the
documentation
that
comes
with
the
device
for
information
about
cabling.
Installing
the
server
in
a
rack
An
optional
Tower-to-Rack
Kit
is
needed
to
convert
the
server
from
a
tower
model
to
a
rack
model.
You
can
then
install
the
server
in
a
rack
cabinet.
To
order
a
Tower-to-Rack
Kit
for
the
server,
contact
your
Lenovo
marketing
representative
or
authorized
reseller.
Note:
The
Tower-to-Rack
Kit
does
not
support
the
server
models
that
have
eight
2.5-inch
SAS
hot-swap
drive
bays.
You
cannot
install
these
models
in
a
rack
cabinet.
54
ThinkServer
TS100
Types
6431,
6432,
6433,
and
6434:
User
Guide