Lennox Hearth EDVI25 - Manual (Page 10)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
10
1. Place the rear log onto the two corresponding locating pins at the
back of the firebox as shown in Figure 22.
. Place the Front Right Log onto the two corresponding locating pins
as shown in Figure 23.
3. Place the Center Log onto the two corresponding locating pins
as shown in Figure 24.
4. Place the Front Left Log onto the two corresponding locating pins
as shown in Figure 25.
5. Install the Top Left Log onto the corresponding locating pin and
indentation on Center Log as shown in Figure 26.
Figure 22 Rear Log
Figure 23 Front Right Log
Figure 24
Figure 25 Front Left Log
6. Install the Front Center Log over the Front Right Log . The front
of log will rest on the burner and the back of log will rest on rear log
as shown in Figure 27.
7. Install the Top Right Log into the corresponding indentations on
Front Center Log and Locating Pin as shown in Figure 28.
Figure 26
Top Left Log
Figure 27 Front Center Log
Center Log