Lexicon 960L - Manual (Page 47)

Operations in Detail Lexicon, Inc.
When you’ve edited a Program or Register until it just
meets your needs, you can store it as a Register and
label it for future use.
Storing
• Press the STORE key on the LARC2 Control
Surface.
• If you've edited a Program, the 960L will select
the next empty Bank (or the Register Bank you
last stored to) and Register.
• If you’ve edited a Register, the 960L will offer to
overwrite the original version. To accept, press
the STORE key again.
• To change the storage location, press the BANK
key and enter the number of the desired
Register Bank, or scroll to it with the Navigation
Arrows. Then press REGISTER and select the
desired Register in that Bank. Pressing STORE
again will store your edits to that location. The
Register you select can be an empty one, or you
can choose to overwrite an existing Register.
Naming and Annotating
Registers and Register Banks can be given any desired
name of up to 16 characters and can be annotated with
up to 150 characters per Register and 100 characters
per Bank.
• Press REGISTER to bring up the Register Load
screen (Figure 4-2).
• Press BANK to name or add info to a Register
Bank. Otherwise you will be working with the
selected Register.
• Press the INFO soft button to brings up the annotation
screen (Figure 4-24), which shows the information for
the currently selected Bank or Register. (Pressing
NAME brings up a similar screen.)
• The currently selected character will be outlined
in red on the name line and in the character
matrix below.
• Characters on the name line are selected with
the increment and decrement keys (hence the
"-" and "+" flanking the name line).
• Characters within the matrix below that line are
selected with the navigation arrows.
• For faster text entry, a PS/2 keyboard can be
plugged into the AUX jack on the back of the
LARC2.
The keyboard should be connected
before power is applied to the 960L Mainframe.
• Just below the character matrix is a line that
shows whether the system is in Insert or
Overwrite mode.
• When editing the Information display, the screen
will show the relevant name, Bank number, and
Register number (if applicable) at the upper left.
When finished editing, either press the SAVE soft
button or the ENTER key if you’ve annotated a Bank, or
store the Register if you’ve annotated a Register.
Storing and Labeling Your Edits
4-16
Figure 4-24 — Register Info Edit