Linksys CISCO SYSTEMS WRT330N - Manual (Page 52)

46 Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
The ADMINISTRATION Tab - FIRMWARE UPGRADE
Wireless-N Gigabit Gaming Router
The ADMINISTRATION Tab - FIRMWARE UPGRADE
The FIRMWARE UPGRADE screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware
unless you are experiencing problems with the Router or the new firmware has a feature you want to use.
Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Firmware Upgrade
Please Select a File to Upgrade. In the field provided, enter the name of the extracted firmware upgrade file, or
click the Browse button to find this file. After you have selected the appropriate file, click UPGRADE and follow
the on-screen instructions.
Figure 5-33: ADMINISTRATION Tab -FIRMWARE
UPGRADE
download: to receive a file transmitted over a network.
firmware: the programming code
that runs a networking device.
upgrade: to replace existing software or
firmware with a newer version.
NOTE: The Router may lose the settings you have customized. Before you upgrade its firmware,
write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all
of your configuration settings.