Linksys CISCO SYSTEMS WRT330N - Manual (Page 12)

6 Chapter 3: Getting to Know the Wireless-N Gigabit Gaming Router
The Back Panel
Wireless-N Gigabit Gaming Router
Chapter 3: Getting to Know the Wireless-N Gigabit
Gaming Router
The Back Panel
The Router's ports, where the cables are connected, and Reset button are located on the back panel.
INTERNET The Internet port is where you will connect your broadband modem.
ETHERNET 1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Router to your wired PCs and other Ethernet network
devices.
Reset Button There are two ways to reset the Router's factory defaults. Either press the Reset button,
for approximately five seconds, or restore the defaults from the Administration - Factory
Defaults tab of the Router's Web-based Utility.
Power The Power port is where you will connect the power adapter.
IMPORTANT: Resetting the Router will erase all of
your settings (Internet connection, wireless
security, and other settings) and replace them
with the factory defaults. Do not reset the Router
if you want to retain these settings.
Figure 3-1: The Router’s Back Panel