Linksys CISCO SYSTEMS WRT330N - Manual (Page 45)

39 Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
The APPLICATIONS & GAMING Tab - QOS
Wireless-N Gigabit Gaming Router
The APPLICATIONS & GAMING Tab - QOS
Quality of Service (QoS) allows the router to give priority to certain types of network traffic.
QoS (Quality of Service)
To enable QoS, click Enable. If you do not wish to use QoS, select Disabled.
Automatic Classification: The router can automatically classify the types of traffic on your network. To enable
automatic classification, click Enable.
Dynamic Fragmentation: The router can dynamically break down data that is too large to transmit in one
session. This can improve network traffic speeds. To enable dynamic fragmentation, click Enable.
Automatic Uplink Speed: The router can automatically detect the maximum uplink speed of your Internet
connection and optimize network traffic accordingly. To enable automatic uplink speed detection, click Enable.
Measured Uplink Speed: If you have enabled Automatic Uplink Speed, this field will display the speed
measured by the router.
Manual Uplink Speed: If you have chosen not to enable Automatic Uplink Speed, select your maximum uplink
speed from the pull down list.
Connection Type: Select the type of Internet connection you have, Cable or DSL. If you wish to have the router
detect the type of connection, select Auto-detect.
Detected Network: If you have chosen Auto-detect for Connection Type, the type of connection detected by the
router will be displayed here.
Add QoS Rule
The router has built-in QoS rules that gives priority to Voice, Video and Game traffic. If you wish to add your own
rules in addition to the router’s built-in rules, click Enable.
Name: Enter a name for the QoS rule. You should choose a name that identifies with the rule created, i.e. Online
Game, VoIP, Video, etc.
Priority: The priority of the traffic can be selected here. Enter a number between 1 and 255. Traffic with lower
numbers will have higher priority than traffic with higher numbers. i.e. Traffic with priority of 1 will have higher
priority than traffic with a priority of 2.
Figure 5-28: APPLICATIONS & GAMING Tab - QOS