Lennox Hearth 775 - Manual (Page 16)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
16
Stove Cast Iron Top Trivet
Ash Lip
Step 16. INSTALL STOVE TOP, TRIVET
AND ASH LIP
A. Place the cast iron top into position on the
stove top (See Figure 35). Place the trivet
into the recess on the cast iron top (See
Figure 35).
Figure 35
Figure 36
CAUTION: THE CAST IRON STOVE TOP IS VERY
HEAVY AND MAY REQUIRE A MINIMUM OF
TWO PEOPLE TO LIFT; ONE PERSON ON EACH
SIDE (THE CI1500 SERIES CAST TOP WEIGHS
~20 POUNDS AND THE CI2500 SERIES CAST
TOP WEIGHS ~40 POUNDS).
B. Locate the ash lip from packaging (Step 2).
Remove the 2 bolts from the tapped holes in
the ash lip. Align the ash lip below the fi rebox
as shown in Figure 36 (the tapped holes in
ash lip should align with corresponding
slots below fi rebox). Reinstall the 2 bolts
that were removed from the ash lip (fi nger
tight only. If a tool is used, be careful not to
overtighten).