Lathem 5000E Plus - Manual (Page 47)

42 43
1
Press the [SELECT] button, at that
moment "9999" is displayed and the
first two digits flash.
(The flashing means it can be changed.)
In the example, press the [CHANGE]
button to set at "12". And then press
the [SET] button.
At that moment, the flashing changes
to the last two digits.
3
Press the [SELECT] button and position the
" " over the "PASSWORD" mark. At that
moment, the first two digits "12" flash.
(The flashing means it can be changed.)
Press the [CHANGE] button to set at
"00". And then press the [SET] button.
4
Press the [CHANGE] button to at set "00".
And then press the [SET] button.
5
After you finish canceling the password,
press the [SET] button once again.
Now the password canceling has been
completed. Replace the cover and lock.
Important: If you do not complete Step
5, the Time Recorder will not print.
The code "0000" must be entered to cancel the password.
Example: Cancel the password "1234".
Canceling the Password
SELECT CHANGE SET
2
In case of the example, press the
[CHANGE] button to set at "34". And
then press the [SET] button.
SELECT CHANGE SET
SELECT CHANGE SET
PASSWORD
At that moment, the flashing changes
to the last two digits "34".
SELECT CHANGE SET
PASSWORD
SELECT CHANGE SET
PASSWORD
At that moment, the " " mark indicates
the "TIME".
SELECT CHANGE SET
SELECT CHANGE SET
TIME MO TU WE TH FR SA SU