Lathem 5000E Plus - Manual (Page 12)

7. SETTING THE DATE
6 7
1
Press the [SELECT] button and position
the " " under the "DATE" mark.
At that moment, the "Year" flashes. (The
flashing means it can be changed.)
Change the "Year".
In case of the example, press the
[SET] button because the year 2003 is
not to be changed.
At that moment, the flashing changes
from "Year" to "Month".
At that moment, the flashing changes
from "Month" to "Date".
3
Change the "Date".
Press the [CHANGE] button to set at
"21". And then press the [SET] button.
4
After you finish setting the date, press
the [SET] button once again.
Now the date setting has been
completed. Replace the cover and
lock.
Important: If you do not complete Step
4, the Time Recorder will not print.
Example: Change the date from October 20, 2003 to October 21, 2003.
2
Change the "Month".
In case of the example, press the
[SET] button because the month is not
to be changed.
SELECT CHANGE SET
DATE
SELECT CHANGE SET
DATE
SELECT CHANGE SET
DATE
DATE
SELECT CHANGE SET
Year
Month Date
MO TU WE TH FR SA SU