Lennox Hearth X-TC - Manual (Page 72)

64 Call options
Place a Call on Hold
You can place a call on hold with
Hold call enabled.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. With no call waiting enabled, the call
goes to
Voicemail .
When a call comes in, do the following:
1. Select Options > Hold call to place
the caller on hold with your recorded
hold message.
2. Select Answer to speak to the caller on hold
or End Call to hang up without speaking.
Change Hold Call Message
1. From Hold call , select Re-record msg .
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
– Play to replay your message.
– Re-record to record your
message again.
– Exit to exit.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location.If it is a two-digit location, press
the first digit briefly, then press and hold the
second digit.
Note: The 1-Touch Dialing feature is the fastest
way to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location. If it is a two-digit location, press
the first digit briefly, then press and hold the
second digit.
From
1-Touch dialing , select Enabled to turn on
1-touch dialing.
Customize Keys
You can modify the Navigation key settings to set
up your desired shortcut.
1. From Customize keys , select Left nav key ,
Right nav key , or Down nav key .
2. Select your desired menu option for the
targeted key shortcut.
Missed Call Alert
From Missed call alert , select Enabled to enable
an alert reminder for missed calls.
Call options
Voice dialing
Use the following features to customize the
voice commands.
Enable Automatic Add
From Automatic add , select Enabled to
automatically add a contact to your voice dial list
when you create a new contact.