La Crosse Technology WS-7213U - Manual (Page 23)

23
TROUBLESHOOTING
NOTE: For problems not solved, please
contact La Crosse Technology via e-mail or
phone, or visit our website,
www.lacrossetechnology.com
Problem: The LCD is faint
Solution: Replace batteries
Problem: No outdoor temperature or
humidity is displayed.
Solution:
1) First try to re-establish communication
between the remote sensor and indoor
weather station by moving both units to
within three to five feet of each other.
Wait about ten minutes and then check
for a temperature and humidity.
2) If this does not work please remove the
batteries from both units and restart the
system (please see Detailed Set-up on
page nine through eleven).
Note: Please make sure when restarting the
system that all batteries are fresh.