La Crosse Technology WS-7213U - Manual (Page 11)

11
5. The indoor weather station should
now show: “-:- -” in the TIME LCD,
indoor temperature in the INDOOR
LCD and outdoor temperature and
humidity in the OUTDOOR LCD.
II. SETTING THE TIME
1. Press and hold the “SET” button for 5
seconds.
2. The hour will begin to flash.
3. Press and release the “+” button to
advance the hour to your desired hour.
4. Press and release the “SET” button to
move to the minute setting.
5. The minutes will begin to flash.
6. Press and release the “+” button to set
the minutes.
7. Press and release the “SET” button to
activate the clock.
Note: There is “PM” displayed to the left of
the hour when between noon and midnight.
During the AM hours this area will be blank.