Show user specified decodes, Section 9.4.3, “show user specified de, Codes – Lucent Technologies Ethereal User Manual
Page 166
dialog box was opened.
4.
Show Current Open a dialog box showing the current list of user specified decodes.
5.
OK Apply the currently selected decode and close the dialog box.
6.
Apply Apply the currently selected decode and keep the dialog box open.
7.
Cancel Cancel the changes and close the dialog box.
9.4.3. Show User Specified Decodes
This dialog box shows the currently active user specified decodes.
Figure 9.7. The "Decode As: Show" dialog box
1.
OK Close this dialog box.
2.
Clear Removes all user specified decodes.
Customizing Ethereal
152
See also other documents in the category Lucent Technologies Hardware:
- 9076 (150 pages)
- CELLPIPE 7820-0766-004 (48 pages)
- AnyMedia Line Access Gateway (4 pages)
- CellPipe 22A Series (2 pages)
- Stinger MS+DSL (2 pages)
- ATM Module 8-Port DS3/E3 (2 pages)
- Web Services Gateway OmniAccess 8550 (8 pages)
- 7820-0657-001 (34 pages)
- Alcatel-Lucent VPN 1200 (6 pages)
- Stinger STGRSACR-SO-ADSL2P (2 pages)
- 106433691 (7 pages)
- 2000 (2 pages)
- VPN Firewall Brick 20 (4 pages)
- 20A-USB (2 pages)
- GW-DS300N (78 pages)
- Network Access Module (75 pages)
- Wavelength Extension Solution Metropolis (4 pages)
- Lucent Network Gateway (2 pages)
- 20H (2 pages)
- 5800 Series (88 pages)
- Cajun Switch P550R (41 pages)
- PortMaster (364 pages)
- 2300 (2 pages)
- Multiplexer and Transport System ADM 16/1 (8 pages)
- Cajun M770 (72 pages)
- DSL Element Management System NavisAccess (4 pages)
- 3000 (586 pages)
- CellPipe 55 Series (2 pages)
- Telephone User Interface Serenade (2 pages)
- APX 1000 (4 pages)
- PacketStar PSAX (4 pages)
- DSL Access Concentrator Stinger FS+ (4 pages)
- USS-720 (96 pages)
- AnyMedia 4300 (2 pages)
- CellPipe 40H-CES (2 pages)
- Stinger Trunk Module OC-12/STM-4 (2 pages)
- Host-Based Controller Modem AT (87 pages)