Sr2690 end plate positioning, Table of contents sr2690 end plate positioning – Land Pride Skid Steer Rakes SR2690 User Manual
Page 19
17
Section 3: Adjustments
4/05/12
SR2672 & SR2690 Skid Steer Powered Rakes 321-004M
SR2690 End Plate Positioning
End plates are utilized to gather and keep rocks and
debris in front of the roller for the purpose of distributing
material over low areas.
Working Position, Forward Travel
Refer to Figure 3-7:
1.
Install right hand end plate (#1) over the three front
support pins on the Powered Rake as shown.
2.
Secure end plate with linchpin (#2).
3.
Install left hand end plate (not shown) on the
opposite end of the Powered Rake.
4.
Secure end plate with linchpin (#3).
Working Position, Reverse Travel
Refer to Figure 3-8:
1.
Install left hand end plate (#3) over the back three
support pins on the Powered Rake as shown.
2.
Secure end plate with linchpin (#4).
3.
Install right hand end plate (not shown) on the
opposite end of the Powered Rake.
4.
Secure end plate with linchpin (#4).
SR2690 End Plate Assembly (Front Mounted)
Figure 3-7
24536
Storage Position,
Forward Travel
Refer to Figure 3-8:
1.
Install left hand end plate (#3) over the back three
support pins on the Powered Rake as shown.
2.
Secure end plate with linchpin (#4).
3.
Install right hand end plate (not shown) on the
opposite end of the Powered Rake.
4.
Secure end plate with linchpin (#4).
Storage Position, Reverse Travel
Refer to Figure 3-7:
1.
Install right hand end plate (#1) over the three front
support pins on the Powered Rake as shown.
2.
Secure end plate with linchpin (#2).
3.
Install left hand end plate (not shown) on the
opposite end of the Powered Rake.
4.
Secure end plate with linchpin (#3).
SR2690 End Plate Assembly (Back Mounted)
Figure 3-8
24537