Land Pride Skid Steer Rakes SR2690 - Manual (Page 11)

9
Section 1: Assembly & Set-up
4/05/12 SR2672 & SR2690 Skid Steer Powered Rakes 321-004M
Table of Contents
End Plate Assembly (SR2672)
Refer to Figure 1-2:
Included with the SR2672 Powered Rake are two end
plates, one right hand and one left hand.
1. Install right hand end plate (#1) over the two side
support pins as shown.
2. Rotate spacer A1 under hitch pin spacer A2 and
insert hitch pin (#2) through spacers A1 & A2.
3. Secure hitch pin with hair pin cotter (#3).
4. Repeat steps 1 through 3 for left hand end plate.
SR2672 End Plate Assembly (Right Hand Side Shown)
Figure 1-2
24535
End Plate Assembly (SR2690)
Refer to Figure 1-3:
Included with the SR2690 Powered Rake are two end
plates, one right hand and one left hand.
1. Install right hand end plate (#1) over the three
support pins as shown.
2. Secure end plate with linchpin (#2).
3. Repeat steps 1 & 2 for left hand end plate.
SR2690 End Plate Assembly (Right Hand Side Shown)
Figure 1-3
24536