Land Pride Disc Harrows DH3510 - Manual

38
Disc Harrows
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
DH35 Series
Description DH3510 DH3512
Drawbar horsepower requirement 45-100 hp 55-100 hp
Weight with 20" discs on 7 1/2"
spacing & no other options 2,491 lbs. 2,747 lbs.
Hitch type Pull-type w/clevis & hole for 1 1/4" pin
Hitch frame construction 3"x 3" x 1/4" Wall tubing w/hose carrier and jack mount
Transport width 10' -10" Base unit 12'-4" Base unit
Max. cultivation width 10'- 6" Approx. 12'-0" Approx.
Mainframe Width 93"
Approx weight load on each blade
with 7.5" spacing 79 to 84 lbs 76 to 82 lbs
Approx weight load on each blade
Blade with 9" spacing 87 to 93 lbs 81 to 86 lbs
Disc blade sizes and types 20" or 22" Notched or smooth
Disc blade spacing 7.5" or 9"
Disc bearing type Greaseable & triple sealed ball bearings
Number of bearings 12 For all ten foot disc configurations 12 For 9" disc spacing
16 For 7.5" disc spacing
Forward gang angle adjustment Single pin adjustment to 15, 16 1/2, 18, 19 1/2 or 21 degrees
Rear gang angle adjustment Single pin adjustment to 12, 13 1/2, 15, 16 1/2 or 18 degrees
Side mainframe construction 3" x 4" x 3/16" Wall tubing
with gusset reinforcements
3" x 4" x 3/16" Wall tubing
with gusset reinforcements
Mainframe front tube 5"x 3" x 1/4" Wall tubing
Center gang beam construction 4"x 3" x 1/4" Wall tubing
Gang swing arm 4"x 3" x 1/4" Wall tubing
Gang axle construction 1 1/8" Square hi-strength steel
Front to rear leveling system Manual crank adjustment
Depth control Cylinder stroke control spacers
Hydraulic cylinder
for depth/lift control 3"x 8" Hydraulic cylinder with hoses and fittings
Transport tires & rims Two 9.5L x 15 tires mounted on 15" x 6" 5-bolt rims
Disc scrapers Optional
Center sweep kit Optional
20" Rear furrow filler pair Optional
18" Rear furrow filler pair Optional
Tongue jack Optional
Dual wheel transport kit Optional
322-251S continued on next page 5/29/13