beautypg.com

Lenovo T420 User Manual

Page 50

background image

Table 2. Numeric error codes (continued)

Symptom or error

FRU or action, in sequence

0191
System Security—Invalid Remote Change requested.

1. Run the ThinkPad Setup program, and then save

current setting by pressing F10.

2. System board.

0199
System Security— Security password retry count
exceeded.

1. Run the ThinkPad Setup program, and then save

the current setting by pressing F10.

2. System board.

0251
System CMOS checksum bad— Default configuration
used.

1. Charge the backup battery for more than 8 hours

by connecting the ac power adapter.

2. Replace the backup battery and run the ThinkPad

setup program to reset the time and date.

0271
Real-time clock error. Check date and time settings.

Run the ThinkPad Setup program to reset the time
and date.

1802
Unauthorized network card is plugged in—Turn off and
remove the miniPCI network card.

1. Remove Mini PCI network card.
2. System board.

1820
More than one external fingerprint reader is attached.
Power off and remove all but the reader that you set up
within your main operating system.

Remove all but the reader that you set up for the
authentication.

2000
Hard Drive Active Protection sensor diagnostics
failed.Press to continue.Press to enter
SETUP

1. Undock docking station or port replicator if it is

attached to the ThinkPad Notebook.

2. Place the ThinkPad Notebook on a horizontal surface.

Do not apply any physical shock to the computer.

3. Run Diagnostics ThinkPad Devices HDD

Active Protection Test.

2100
Detection error on HDD0 (Main HDD)

1. Reseat the hard disk drive.
2. Main hard disk drive.
3. System board.

2101
Detection error on HDD1 (Ultrabay HDD)

1. Reseat the hard disk drive.
2. Ultrabay hard disk drive.
3. System board.

2102
Detection error on HDD2 (Mini SATA)

1. Reseat the Mini SATA device.
2. Mini SATA device.
3. System board.

2110
Read error on HDD0 (Main HDD)

1. Reseat the hard disk drive.
2. Main hard disk drive.
3. System board.

2111
Read error on HDD1 (Ultrabay HDD)

1. Reseat the hard disk drive.
2. Ultrabay hard disk drive.
3. System board.

2112
Read error on HDD2 (Mini SATA)

1. Reseat the Mini SATA device.
2. Mini SATA device.
3. System board.

2200
Machine Type and Serial Number are invalid.

System board.

2201
Machine UUID is invalid

System board.

44

ThinkPad T420 and T420i Hardware Maintenance Manual

This manual is related to the following products: