Lexmark MENUS AND MESSAGES C524 - Manual (Page 34)

Menu Groups
34
Using printer menus
Standard Network and Network
Use these menu items to change printer settings affecting jobs sent to the printer through a network port (either Standard
Network or Network ).
Menu item Purpose Values
PCL
SmartSwitch Configures the printer so it
automatically switches to
PCL emulation when a print job
received through the network port
requires it, regardless of the default
printer language. *On Printer examines data on the network
interface and selects PCL emulation if
the data indicates that is the required
printer language.
Off Printer does not examine the incoming
data. The printer uses PostScript
emulation to process the job if PS
SmartSwitch is On, or uses the default
printer language specified in the
Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch Configures the printer so it
automatically switches to
PostScript emulation when a print
job received through the network
port requires it, regardless of the
default printer language. *On Printer examines data on the network
interface connection and selects
PostScript emulation if the data
indicates that is the required printer
language.
Off Printer does not examine the incoming
data. The printer uses PCL emulation
to process the job if PCL SmartSwitch
is On, or uses the default printer
language specified in the
Setup Menu
if PCL SmartSwitch is Off.
NPA Mode Specifies whether the printer
performs the special processing
required for bidirectional
communication, following the
conventions defined in the Network
Printing Alliance (NPA) Protocol.
Note: Changing this menu item
automatically resets the printer.
Off Printer does not perform NPA
processing.
*Auto Printer examines the data to
determine the format and then
processes it appropriately.
Network Buffer Configures the size of the network
input buffer.
Note: Changing the Network Buffer
menu item automatically resets the
printer.
*Auto Printer automatically calculates the
Network Buffer size (recommended
setting).
3K to maximum
size allowed
(1K increments) User specifies the Network Buffer size.
The maximum size depends on the
amount of memory in the printer, the
size of the other link buffers, and
whether Resource Save is set to On or
Off. To maximize the range for the
Network Buffer size, disable or reduce
the size of the parallel, serial, and USB
buffers.
Job Buffering Temporarily stores jobs on the
printer hard disk before printing.
Note: Changing this menu item
automatically resets the printer.
*Off Does not buffer jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is
busy processing data from another
input port.