Tu 2, Changing the bass and treble – Linn Kolektor User Manual

Page 22

The function of each key is explained in the following table:

Press this key

To do this

Mute or unmute the sound.

SRC- and SRC+

Select the previous/next source.

RECORD

Lock and unlock the current input to avoid

accidentally changing the input while recording.

VOL- and VOL+

Adjust the volume.

Select the bass.

Select the balance.

Select the treble.

(

and

)

Adjust the bass, balance, or treble selection.

SRC-

SRC+

RECORD

VOL-

VOL+

tu 2

BASS

BALANCE

MUTE

RENAME

SOURCE

VOLUME

LOCK

TREBLE

CURRENT SOURCE NAME

AND INPUT

SELECT BALANCE

SELECT BASS

ADJUST BASS, BALANCE,
OR TREBLE

SELECT TREBLE

SOURCE

RECORD
SOURCE

REDUCE

VOLUME

INCREASE

VOLUME

SOURCE

MUTE

While you are adjusting the balance the display will show the

current balance setting, and the BALANCE indicator will be lit:

9~-_

BALANCE

_-~9

BALANCE

CENTRE POSITION

FULLY RIGHT

FULLY LEFT

While you are adjusting the balance press

+ to restore the balance

towards the centre position.

Changing the bass and treble

The KOLEKTOR has individual bass and treble controls to allow you

to adjust the sound to suit a wide range of speakers, sources, and

room acoustics.

To change the bass or treble

BASS

? &

Press

* or ! (front panel) to display the current bass or treble

setting respectively. Then use

( and ) (front panel) to set the bass

or treble as required.

Alternatively press BASS- or BASS+ (handset) to set the bass or

TREB- or TREB+ (handset) to set the treble.

You can change the bass and treble from -7 (maximum cut),

through 0 (level), to +7 (maximum lift).

After adjusting the bass or treble the display will revert to normal

after a delay. While you are adjusting bass or treble, pressing

* or

! will restore the value towards zero.