Linn Kolektor - Manual (Page 18)

8
the front panel should be kept out of direct sunlight, and it should
not be obscured.
Note that certain types of halogen lamps, and low-energy or
fluorescent bulbs, can also interfere with use of the handset if they
are near to the infra-red sensor.
Connecting the KOLEKTOR
The following diagram shows the connections for the rear panel of
the KOLEKTOR:
WARNING: The KOLEKTOR should be switched off before
connecting or disconnecting any of the plugs on the rear panel, or
you may generate surges which could damage other components
in your hi-fi system.
Connecting the sources
The KOLEKTOR provides line-level RCA phono input connections
for up to ten sources, labelled 1 to 10 on the back panel.
230
10 TAPE OUT
IN OUT RS 232-C
L
R
L
R
9 8 7 6 5 4 3 2
GROUND
1 (PHONO)
LINE
OUTPUTS
LINE
INPUTS
VOLTAGE
SELECTOR
MAINS INPUT
RS232
CONNECTIONS
VOLTAGE
SELECTOR
FUSE AUDIO
OUTPUTS
TAPE
OUTPUTS
AUDIO
INPUTS
CONFIGURABLE
PHONO INPUT
PHONO
GROUND
21
To change the name of the currently selected input
SRC+
tu 2 RENAME
SOURCE
tP 2 RENAME
SOURCE
Press SRC+ (front panel or handset).
The name will step through the following sequence of options:
Display Handset button Description
cd CD CD player
tu TUNER Tuner
tp TAPE Tape deck
Au AUX Auxiliary
tn TV Television
cr VIDEO Video Cassette Recorder
St SAT Satellite
cb CABLE Cable
dd DVD DVD player
Ld LASER LaserDisc player
dt DAT DAT player
ph PHONO Phono
-- None Unused input
To save the new input names
SRC-
""""
tp 2
SOURCE
Press and hold down SRC- (front panel) until the progress bar
display is complete.
The KOLEKTOR Preamplifier will then return to normal operation
with the new input names you have defined.
Note that if you release SRC- before the progress bar is complete
you will return to input naming mode.
2