Configure ip port, Unit configuration, For details – Lindy MC5-IP User Manual
Page 76: Standard configuration menu, Es. see

75
Configure IP port
Available only on MC5-IP models, 
the IP port configuration menu 
allows you to determine settings that 
relate directly to the global (IP) user 
aspects of the unit:
•
Unit Configuration
IP admin password, encryption 
settings, etc. 
•
IP address, net mask, VNC port, 
etc.
•
Baud rate, initialisation string, 
etc. 
•
Completely resets the IP portion 
of the MC5-IP unit.
Unit Configuration
This page provides access to 
a selection of both basic and 
fundamental settings for the MC5-IP. 
Keyboard
Use the arrow buttons to match the 
keyboard layout expected by the host 
system.
Admin Pwd
Enter the password that will be used 
to gain administrator access to the 
MC5-IP. There can only be one admin 
user and only that user is given access 
to the configuration menus. The 
admin password background will be red until a reasonably secure password has 
been entered, although this is only advisory as any password or no password 
may be entered.
Unit Name
The name entered here will be displayed on the local menus and the remote 
VNC/browser windows.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time 
entry uses the 24 hour clock notation. The internal real time clock will continue 
to run for roughly one week without power to the unit, after that it will be lost 
and require resetting. Use the up and down arrow keys to move between each 
of the sections within the time and date entries.
Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose 
depends on the specific details of your installation - see 
details. The use of encryption imposes a slight performance overhead of roughly 10% 
but is highly secure against third party intrusion.
To get here
1 From a local or remote (not accessible from a global keyboard), log on as
the ‘admin’ user.
2 Press
(hotkeys can change).
3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Configure IP port’. 
LINDY MC5
Configuration
Unit Configuration
Network Configuration
Modem Configuration
Reset Configuration
Back
Enter-Select
-Up
-Down
Esc-Exit
LINDY MC5
Unit Config
Hardware
Rev 1
Firmware
1.0b7
Keyboard
UK
Admin Pwd
Unit Name
AV CATx
Time
11 : 14 : 44
Date
27 Apr 2006
Encryption
Prefer Off
Enter-Select
-Up
-Down
Esc-Exit
Space-Toggle
