Kenwood eXcelon KDC-X915 - Manual (Page 12)

• This function cannot be operated while the Black Mask
function is on.
• Character items are not displayed when the graphic display
function is turned off.
• During horizontal division mode
The left side display is switched each time the CLK button is
pressed.
The right side display is switched each time the DISP button is
pressed.
• This function cannot be operated while the Black Mask
function is on.
• The right side display items vary depending on the source
that is playing. For details refer to the "Switching Display"
page for source modes.
NOTE
DISP button CLK button
Right side display Left side display
Station frequency
Band display
+ Preset station number
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
SNPS name /
Program Service name
Band display
+ Preset station number
Example: Tuner mode
You can change the display in each mode.
Selecting the Display Mode:
Each time you press the D.M button for at least one second,
the display mode changes as follows:
Changing the Display:
• During full-screen display mode
Each time you press the CLK button, the display changes as
follows:
NOTE
Character
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
"ALL OFF"
Character
Date + Clock
(Standby mode) (Source mode)
Full-screen display mode
Horizontal division display mode
Vertical division display mode
Switching Display
Function of the KDC-X915/KDC-X815
Turning non-fading output On/Off :
Press the NF button for at least one second to set the function
ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
Non-Fading Output
General features
— 12 —
English
KDC-X915_U.S_r4 00.12.26 3:53 PM Page 12