Konica Minolta DiMAGE G500 - Manual (Page 76)

76
Erasing the Playback Image
- You can erase playback images (one frame or all).
- You cannot erase protected images.
- Once an image is erased, it cannot be restored.
1. After pressing the PLAY button, use
left or right to select the image you
wish to erase.
• If you wish to erase all frames, it doesn’t
matter which image is displayed.
2. Press the DELETE button and a
screen appears indicating the
media type to be erased and
prompting you to select the frame
range. Press left or right to select
“THIS” (the selected image) or
“ALL”, and press the MENU/SET
button.
• If you decide not to erase a frame, select
“CANCEL” or press the DELETE button
again, then you will return to screen 1.
3. Once erasing starts, the “THIS
DELETE…” screen is displayed.
When the process is finished, the
display returns to the playback
image.
• If there isn’t any image data, “NO DIS-
PLAY DATA” is displayed.
• Once an image is erased, it cannot be
restored.
1
2
3