Konica Minolta DiMAGE G500 - Manual (Page 38)

38
Selecting the Shooting Mode
- Selecting different shooting modes enables you to create the best shooting
condition for your subject.
- Once a mode is set (apart from the self-timer), you can shoot continuously. It is
recommended that the mode should be returned to AUTO mode (no display)
after shooting.
- You can set the self-timer for a 3- or a 10-second delay (factory setting),
although the 10-second setting is effective for the next shot only. The 3-sec-
ond setting remains in effect until you change it again.
- Also, when you turn the camera OFF, the shooting mode you set is canceled
and the camera automatically returns to AUTO-mode shooting operation (no
display). But the flash-mode setting remains in effect even if you switch the
power OFF and back ON.
- Using the custom function (p.107) enables you to set up your favorite shooting
modes.
1. Turn the power on so
that the LCD monitor is
lit.
2. By pressing left or right,
bring up the desired
shooting mode symbol
on the LCD monitor.
Pressing right enables the selection of the following modes.
1) AUTO (Automatic Flash) (p.40)
2) Red Eye Reduction (p.40)
3) Fill-In (p.41)
4) Slow Sync (p.41)
5) Off (Flash Override) (p.41)
• Every time right is pressed, the mode symbols will be displayed one by
one, through the list.