Kenwood Z828MP - Manual (Page 50)

English
— 50 —
Connecting Cables to Terminals
TEL MUTE
EXT.
CONT.
P.CONT
ANT.
CONT.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
NON
FADING
FRONT
AUX IN
REAR
Front left output (White)
Front right output (Red)
Rear right output/ Non-fading right output (Red)
Rear left output/ Non-fading left output (White) Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right ( + )
Rear Right ( – )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
Battery cable (Yellow)
Ignition cable (Red)
FM/AM antenna input Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Wiring harness
(Accessory1)
If no connections are
made, do not let the cable
come out from the tab.
NOTE
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
Power control/ Motor antenna
control cable (Blue/White)
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector B
Fuse(10A)
Connector A
TEL mute cable (Brown)
To connect the KENWOOD navigation
system, consult your navigation manual.
NOTE
External amplifier control cable
(Pink / Black)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
To KENWOOD disc changer/ DAB control input
KPA-SD100/KPA-HD100/KPA-SS100
To connect these leads, refer to the relevant
instruction manuals.
NOTE
AUX left input (White)
AUX right input (Red)