Kenwood Z828MP User Manual

Page 23

Select the band/station that you want to have stored.

Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.

You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.

NOTE

— 23 —

When you know the frequency of the station that you want to
listen to, you can input it directly for quick access.

Select the band by pressing the FM or AM button.

Press the DIRECT button.
"----" is displayed for 10 seconds.
If you make no input in the 10-second period, direct access tuning
is automatically cancelled.

Enter the frequency of the desired station.
If you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.

• You cannot enter frequencies above or below what a band can

receive.

• FM frequencies can only be input in 0.1 MHz steps, and not

0.01MHz steps.

Cancelling Direct Access Tuning:

Press the DIRECT button again.

NOTE

Direct Access Tuning

(

Function of remote control)

You can search for the preset station with Programme Service
name.

Press the DNPP button on the remote control.
"SNPP" will be displayed once the seek mode is entered.
The names of the stations preset in the band currently listened
to are displayed for 5 seconds each.
The display band switches in the following order:

Each time you press the

¢ button, the station display

switches in the forward direction.
Each time you press the

4 button, the station display

switches in the reverse direction.
Stations which have no names will be displayed as
frequencies.

Changing the Displayed Band

Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.

Once the name is displayed for the station you want to listen
to

Press the OK button.
Reception starts of the displayed station, and the seek mode
ends.

Cancelling mode during input:

Press the DNPP button.
The seek mode is cancelled.

NOTE

= FM1 Ô FM2 Ô FM3 Ô AM +

Preset station seek with Programme service
name

(Function of Remote Control)