Kenwood Z828MP - Manual (Page 32)

• The Disc Name Preset function cannot be used during the
Magazine random play as well as while a disc title or track title
is displayed in the upper part display.
• The Disc Name Preset function cannot be used while folder
name or ID3 tag(Artist, Album) is displayed in the upper part
display.
Press the NAME.S button for at least two seconds.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
Press either the 4 or ¢ button to move the cursor to the
desired position.
The
4 button moves the cursor to the left, and the ¢
button to the right.
You can also move the cursor left or right by pressing the
4
or ¢ buttons, respectively, on the remote control.
Each press of the 38 button results in the type of characters
that are to be entered changing between alphabet and
numerals/symbols.
Press the DISC
+
or DISC
–
button to display the desired
character.
Characters that can be displayed are as follows.
Direct Alphabet Input
(Function of remote control with number/letter entry buttons)
You can directly input letters using the number/letter entry
buttons on the remote control.
Example: Use the following table to enter the name "DANCE".
NOTE
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ z
Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]
Special characters: б а й и н м у т ъ щ С З ® Я ‹ fl
в д к л о п ф ц ы ь с з © Ж › fi
4
3
2
Store the names of discs to be displayed when played.
Play the disc whose name you want to preset.
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
NOTE
1
Presetting Disc Names (DNPS)
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
Display the disc or track title in the upper part display, referring
to "Switching the Upper Part Display" (page 12).
Holding down the DISP button for one second or more results
in one scrolling display of the titles.
To scroll automatically:
Display the disc or track title referring to the "Switching the
Upper Part Display" (page 12) or "Switching the Lower Part
Display" (page 14).
The titles will be displayed in one scrolling display.
Holding down the DISP button for one second or more results
in one scrolling display of the titles.
• Please see the menu settings (page 45) about switching
between manual scrolling and automatic scrolling.
• You can scroll text when "Display Type A" or "Display Type B" has
been selected by the switching display mode function.
For display mode selection, see "Switching display mode" (page
12).
• You cannot use the text scroll function during magazine random
play.
NOTE
2
1
2
1
Text Scroll
CD/External disc control features
— 32 —
English