Konica Minolta magicolor 5550/5570 - Manual (Page 107)

Specifying Printer Driver Settings 89
Options Installed
Image RGB Intent Specifies RGB intent for image as Vivid,
Photographic, Relative Color, or Absolute
Color.
„ The default setting is Photographic.
Image RGB Source Specifies RGB source for image as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
„ The default setting is sRGB.
Parameters Settings
Duplex Unit Select Enable if the optional duplexing unit
for the printer has been installed.
„ The default setting is Disable.
Output Tray Unit Select Enabled if the output tray unit (staple
finisher) is installed. Select Disabled if it is
not installed.
„ The default setting is Disabled.
Paper Source Unit Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
„ The default setting is Disable.
Printer Memory Select 256 MB, 512 MB, 768 MB, or
1024 MB if the optional memory for the
printer has been installed.
„ The default setting is 256 MB.
Storage Select None, CF (1GB Under), CF (1GB
Over), HDD, HDD + CF (1GB Under) or
HDD + CF (1GB Over) for the storage unit
that is installed.
„ The default setting is None.
Parameters Settings