Konica Minolta magicolor 5550/5570 - Manual (Page 144)

Adding a Crown Port After Installing Crown Print Monitor+ 126
Adding a Crown Port After Installing Crown
Print Monitor+
After Crown Print Monitor+ is installed, a Crown port can be added by follow-
ing the procedure described below.
"
The following procedure provides a description when Crown Print
Monitor+ is already installed on the computer.
For Windows XP, 2000 and NT 4.0:
1
Click Start, and then click Printers and Faxes.
"
For Windows 2000 and Windows NT 4.0, click Start, point to Set-
tings, and then click Printers.
2
Right-click the printer icon, and then click Properties.
The Properties dialog box for the printer appears.
3
Click the Ports tab.
4
Click Add Port.
The Printer Ports dialog box appears.
5
From the Available port
types list, select Crown
Port+, and then click New
Port.
The Add Crown Port+
dialog box appears.
"
For Windows NT
4.0, select Crown
Port+ from the
Available Printer
Ports list.
6
In the IP Address text box, type the IP address for the printer.
"
For this address, type in a unique host name or the dot notation
identifier (IP address) for the printer.
"
The printer search function is not supported with this printer.