KTM 400 - Manual (Page 7)

ENGLISH
6
Combination switch (EXC)
The light switch has 2, respetively 3 switch positions.
A = Light off (this function is not available in all models)
B = Low beam on
C = High beam on
You may use button 1 to actuate the horn.
The red short circuit button 2 serves to switch off the engine. Leave the
switch pressed until the engine stops.
Headlamp switch (EXC USA)
In this model the headlamp is switched on with the pull switch 3 .
Flasher switch
Flasher left
Flasher right
Emergency OFF button (EXC)
The red emergency-OFF button 4 is arranged adjacent to the
throttle grip. To turn off the engine, push the button until the engine
comes to a standstill.
Pushing of the black starter button 5 actuates the E-starter.
ƽ WARNING ƽ
A LWAYS VERIFY THAT THE TRANSMISSION HAS BEEN SET TO IDLE ( NEUTRAL ) BEFORE
ACTUATING THE STARTER BUTTON . I F YOU START THE MOTORCYCLE WITH A GEAR
ENGAGED , THE MOTORCYCLE WILL MOVE FORWARD .
Emergency OFF switch (EXC Australia)
The red emergency-OFF switch 6 is arranged adjacent to the throttle grip.
In this position, the E-starter is operational and the engine can
be started.
In this position, the E-starter and ignition circuits are interrup-
ted. The E-starter cannot be actuated, and the engine will not
start, not even if you attempt to start it with the kickstarter.
Pushing of the black starter button 5 actuates the E-starter.
ƽ WARNING ƽ
A LWAYS VERIFY THAT THE TRANSMISSION HAS BEEN SET TO IDLE ( NEUTRAL ) BEFORE
ACTUATING THE STARTER BUTTON . I F YOU START THE MOTORCYCLE WITH A GEAR
ENGAGED , THE MOTORCYCLE WILL MOVE FORWARD .
2
A
B
C
1
3
5
4
5
6