Bounce and burn, Important d1200mkii owner’s manual references – KORG D1200mkii User Manual
Page 8
D1200mkII EasyStart
8
Bounce and Burn!
1.
2.
3.
4.
5.
6.
Press the [BOUNCE] key. On the “RecMode” tab select Bounce using the CURSOR keys and press [ENTER]. On the
“Bounce” tab, select 12Tr->2Tr using the CURSOR keys and press [ENTER]. CURSOR down to RecordVirtualTrack
and select virtual track “h” (or any Virtual track that has not been used) by using the DIAL.
Set tracks 11-12 to record ready mode by pressing the [TRACK SELECT KEY] for track 11/12 two times (Tracks 11/12
LED should now be red). Now your ready to mixdown to tracks 11-12, virtual track “h” (or the Virtual track you’ve
selected).
Press the [METER/TRACK VIEW] key. Press PLAY [] and be sure the MASTER level is not clipping. Make necessary
adjustments to the MASTER level. Press STOP [] when done. Return to the beginning of the song by holding the
STOP [] key and pressing REW [] simultaneously.
Press REC [
] and then press PLAY [] to start recording your mixdown. When the song is completed press STOP
[]. Return to the beginning of the song by holding the STOP [] key and pressing REW [] simultaneously.
Press the [TRACK] key, then press the [
CURSOR keys and rotate the DIAL to select tracks 11-12h (or the Virtual track you’ve selected).
Press the [CD] key
Ä
On the “Prepare” tab, select tracks 11-12 (under SelTrks: on the display) by rotating the DIAL. You
can test-monitor the level of your mix: CURSOR to TrackMonitor, press [ENTER] and then press PLAY [] to
playback your mix and verify your mixdown levels are not clipping. When using the track monitor function, the tracks will
play back without being routed through the mixer (i.e., without EQ or effects) and are output through the MONITOR and
PHONE outputs.
7.
Let’s Burn! Press [TAB->] to select the “CDR/RW” tab , Insert a blank CD-R or CD-RW disc into the CDR/RW drive and
press WriteToCD in the display.
8.
9.
10.
Select “16x” as the write speed, and press [YES/OK] when prompted “AreYouSure?”
When the writing procedure is completed, press [NO/CANCEL] when prompted “Write another CD?”
To make the CD playable in a audio CD player, the CD must be finalized. Before finalizing the disc, other tracks can be
written to the CD, but once finalized, no additional tracks can be written. TO FINALIZE: Select Final by using the
CURSOR keys and press [ENTER]. Press [YES/OK] when prompted “AreYouSure?”.
11.
Enjoy!
!
The “DiscAtOnce” function in the CD mode allows you to burn and finalize a multi-song audio CD in one process. It also
allows you make an audio CD with no gaps between tracks. In other words, you can record a continuous live
performance of multiple songs, and then insert Marks between songs. When you use “DiscAtOnce”, these Marks are
registered as divisions between CD tracks, so that in CD playback you can cue each song, and finalizing will be done
automatically.
Important
D1200mkII Owner’s Manual references
Installing the CDRW-1x8 drive
149
CD Mastering
64-67/93-94
D1200mkII MIDI sync procedures
79-80
Controlling the D1200mkII from an external sequencer
79
Using MIDI for mixer control
80
MIDI Machine Control (MMC)
79/102
Working with WAV files and the Import/Export function via USB or CD
113
Initializing/formatting internal or external hard drive
75
Backing up and restoring data via USB or CD
102-105
Saving Data to your computer using USB
77-78
Recording Rhythms and using Tempo Maps
48-52
Updating system software
81
Troubleshooting
143