Konica Minolta Magicolor 2590 MF - Manual (Page 67)

Group Dialing 61
7
Change the name, fax number, modem speed as desired.
"
If you try to change the settings for a speed dial number used in group
dialing, a confirmation message appears, asking whether or not to
keep the changed speed dial number in the group dialing.
If the Menu Select key is pressed, the corresponding speed dial num-
ber programmed in group dialing is kept.
If the Cancel/C key is pressed, the corresponding speed dial number
programmed in group dialing is deleted.
"
For details on editing text, refer to “Entering Text” on page 79.
8
When you are finished making changes, press the Menu Select key.
The speed dial input screen appears.
9
To change or to delete another speed dial number, enter the speed dial
number, and then repeat the procedure starting from step 5.
"
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.
Group Dialing
Programming Group Dialing
Register multiple frequently used fax numbers (maximum 50) together with
one-touch dial keys and speed dial numbers. Press a one-touch dial key
when sending a fax to recall them.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press the , key twice.
3
Check that the GROUP DIAL screen appears, and then press the Menu
Select key.
4
Press the one-touch dial key that you want to program.
"
If the one-touch dial key that is pressed is already registered with a
recipient, the message “REGISTERED!” appears. Press the Menu
Select key, and then press a one-touch dial key with no recipient reg-
istered.