Basic fax operation, Sending a fax using the adf, Basic fax operation 30 – Konica Minolta Magicolor 2590 MF User Manual
Page 36: Sending a fax using the adf 30
Basic Fax Operation
30
Basic Fax Operation
This section contains basic information of fax transmission.
"
Only Statement (ST), Letter (LT), Legal (LG), A5, or A4 size docu-
ments are available for fax transmission.
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
"
Do not load original documents that are bound together, for example,
with paper clips or staples.
"
Do not load more than 50 sheets; otherwise an original document mis-
feed or damage to the document or machine may occur.
"
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
"
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Press the Fax key to enter Fax mode.
2
Make sure that there is no document on the original glass.
3
Put the document into the ADF
document feed tray face up.
4
Adjust the document guides to the document size.
5
Press the Resolution key to specify the desired image quality.
"
The document image quality can be adjusted by pressing the Resolu-
tion key. For details, refer to “Improving Resolution” on page 34.
6
Specify the fax number of the recipient in one of the following ways:
–
Direct dialing
–
Using the one-touch dial key (including the group dial function)