Kidde PI2000CA - Manual (Page 3)

This unit is suitable as a single station and/or multiple
station alarm (interconnects with up to 24 devices), and
has a ten-year limited warranty.
IMPORTANT:This unit is only approved to interconnect
with the Kidde line of products. It is not approved to
interconnect with any other manufacturer’s products.
This alarm is interconnect compatible with the following
alarms and accessories:
Smoke alarms: 1235CA, 1275CA, 1276CA, 1285CA,
i12020CA, i12040CA, i12060CA,
PE120CA, PI2000CA, PI2010CA
Smoke/CO alarms: KN-COSM-IBCA, KN-COSM-ICA
CO alarms:
KN-COB-ICB-CA, KN-COB-IC-CA
Relay modules: 120X, SM120X, CO120X
Heat alarm: HD135FCA
Strobe Light: SL177I
Refer to respective manuals for specific application
information.
This product is designed to detect products of combustion
using both an ionization sensor and a photoelectric sensor.
The ionization sensor contains 0.9 microcurie of Americium
241, a radioactive material. Distributed under U.S. NRC
License No. 32-23858-01E. Manufactured in compliance
with U.S. NRC safety criteria in 10 CFR 32.27. The
purchaser is exempt from any regulatory requirements. Do
not try to repair the smoke alarm yourself. Refer to the
instructions in Warranty for service.
ELECTRICAL RATING: 120 V AC, 60 HZ, 80 mA maximum
per alarm (maximum 80 mA for originating unit with 24
devices interconnected).
WARNING! Battery door will not close unless battery is present. Removal of
the smoke alarm battery and disconnecting or loss of A.C power will
render the smoke alarm inoperative.
IMPORTANT! Read all instructions before installation and keep this
manual near the alarm for future reference.
Installation
2