Kenwood DNX7180 - Manual (Page 28)

28
Quick Start Guide
Connecting wires to terminals (2)
A
A
Red (Ignition wire)
Black (Ground wire)
(To car chassis)
Yellow (Battery wire)
To use the steering wheel remote control feature,
you need an exclusive remote adapter (not
supplied) matched to your car.
Light Blue/Yellow
(Steering remote control wire)
Orange/White
(Dimmer control wire)
Brown (Mute control wire)
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To use the Mute feature of DNX5180, you need
to hook up this wire to your telephone by using a
commercial telephone accessory.
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
or to the power terminal for the booster amplifier
of the film-type antenna.
When using the optional power amplifier, connect
to its power control terminal.
If no connections are made,
do not let the cable come out from the tab.
To steering remote
To car light control switch
Ignition key
switch
Car fuse box
(Main fuse) Car fuse box
ACC
Battery
Accessory 1
REMOTE CONT
ILLUMI
MUTE
ANT. CONT
P. CONT
STEERING WHEEL
REMOTE INPUT
DNX7_QSG_K.indd 28 10/12/16 16:42