Kenwood DNX7180 User Manual
Page 23
23
DNX7180/DNX7480BT/DNX6980/DNX6180/DNX6040EX/DNX6480BT/DNX5180
Installation Procedure
Supplied accessories
First of all, make sure that all
accessories are supplied with the
unit.
1
...1
7
...6
2
...1
8
...6
3
...1
9
...1
4
...2
0
...1
5
...1
-
...1
6
...1
=
...1
Unit
1 To prevent a short circuit, remove
the key from the ignition and
disconnect the terminal of the
battery.
2 Make the proper input and
output wire connections for each
unit.
3 Connect the speaker wires of the
wiring harness.
4 Connect the wiring harness wires
in the following order;
ground, battery, ignition.
5 Connect the wiring harness
connector to the unit.
6 Install the unit in your car.
7 Reconnect the terminal of the
battery.
8 Press the
9 Perform the Initial Setup.
See First Step (P.6).
●
Non-Japanese cars
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
Continued
DNX7_QSG_K.indd 23
10/12/16 16:42