Kenwood DNX7180 - Manual (Page 11)

11
DNX7180/DNX7480BT/DNX6980/DNX6180/DNX6040EX/DNX6480BT/DNX5180
Number Name Motion
1
fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.97).
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (Instruction Manual P.72).
2
MENU • Displays the Top Menu screen (Instruction Manual P.14).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
3
NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
4
TEL • Displays the Hands Free screen (Instruction Manual P.55).
• North America Sales area: Pressing for 1 second stores the tag data of the
current music from HD Radio (Instruction Manual P.51).
• Central and South America sales area: Pressing for 1 second turns off the
display.
5
Volume Knob • Pressing switches attenuation of the volume on/off.
• Turning adjusts volume up or down.
• Pressing for 1 second displays Tone Control screen (Instruction Manual
P.87).*
6
SCRN • Displays the Screen Control screen.
• Pressing for 1 second displays rear view camera display.
7
Remote
Sensor Receives the remote control signal.
You can enable or disable this feature by Remote Sensor (Instruction
Manual P.71).
8
0 (Eject) • Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
9
Disc insert
slot A slot to insert a disc media.
10
MicroSD
card slot A microSD card slot for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
* The display may not switch to the Tone Control screen in some conditions.
DNX7_QSG_K.indd 11 10/12/16 16:41