Basic copying, Lens modes (continued) – Konica Minolta Copier 2223 User Manual

Page 49

Text mode
Original mode

Basic Copying 5-11

Basic Copying

Lens Modes (continued)

Programming a User Preset Ratio
For convenience, program a frequently-used ratio that is not available
as a factory preset ratio. This ratio can be set and changed by the user
as needed.

USER PRESET RATIO: Programmable from 0.50~2.00 in 1% increments

1 While pressing

[P]

, press

LENS

MODE

. The User Preset

indicator light will flash.

NOTE: The User Preset ratio will remain stored until it is overwritten.

2 Use the Keypad to enter a

three-digit ratio (0.50~2.00).

3 If necessary, press

STOP/

CLEAR

to restore the original

ratio or to clear a mis-entry.

4 Press

[P]

to store the new ratio.