Kenwood DDX8046BT - Manual (Page 98)

98 DNX series DNX9960/ DNX7160/ DNX7020EX
Setup Menu
DVD Setup DVD Setup
You can set up the DVD play.
1 Display the DVD Setup screen
Touch [ ] > > [ ] > > [DVD SETUP].
(page 78)
2 Set each item
[Menu Language]* 1 Selects a disc
menu language. See
Setup> (page 99).
[Subtitle Language]* 1 Selects a subtitle
language. See
(page 99).
[Audio Language]* 1 Selects an audio
language. See
(page 99).
[Dynamic Range Control]* 1 Sets the
dynamic range. ( "Dialog")
The dynamic range is reduced by
changing from "Wide" to "Normal"
and from "Normal" to "Dialog". "Dialog"
makes the total sound volume becomes
larger as compared with "Wide" and
"Normal", allowing you to listen to the
movie's dialog more clearly.
This is effective only when you are using
a Dolby Digital software.
The operation is available during the
play stop mode.
[Angle Mark] Sets an angle mark
display. ( "ON")
[Screen Ratio]* 1 Selects the screen
display mode. ( "16:9")
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the
Letter Box format (having black stripes
at the top and bottom of screen).
"4:3 PS": Displays wide pictures in the
Pan & Scan format (showing pictures
cut at the right and left ends).
[Parental Level]* 1 Displays the Parental
Lock screen. ( "OFF")
See (page
99).
[Disc SETUP] Makes the settings related
to the disc media. See
(page 100).
[Stream Information] Displays the
present source information.
The stream (Dolby Digital, dts, Linear
PCM, MPEG, MP3, WMA or AAC) is
displayed. (DNX7 series only)
⁄
• * Disabled when a DVD is being played.