Kenwood DDX8046BT - Manual (Page 45)

DDX series DDX896/ DDX8046BT English 45
Next page 3
SIRIUS/XM Control (North American sales area only)
Source Control Screen Source Control Screen
Switches to control screen to use various
functions.
1 Display the Source Control Screen
See Screen> (page 18).
2 Operation on the Source Control
screen
2 2 2 1 1 1
[BAND] Switches the band.
[ 4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Category List or Channel
List Screen. See Search> (page 46).
1 Information display
Displays information concerning music
being played.
SIRIUS SIRIUS Changes the display from
Channel Name, Song Title Name,
Artist Name, Composer Name, to
Category Name.
XM XM Changes the display from
Channel Name, Artist Name, Song
Title Name, to Category Name.
Various control screens appear in the Satellite radio source mode. (Only with the optional
accessory Satellite radio connected. To connect the SIRIUS tuner, a conversion cable
CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface
Box KCA-XM100V (optional accessory) is necessary.)
• This document uses the SIRIUS display as an example.
Displays the ID number when Channel
0 is selected.
SIRIUS SIRIUS Displays the SIRIUS ID.
XM XM Displays the RADIO ID.
"SR"/ "XM" Band display
"Preset" Preset number
"ch"/ "CH" Channel display
[ ] When appears, the text display
is scrolled by touching it.
Multi Function
[1/2] Switches the multi function
display.
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall the channel
on memory. For memory of channel
stations, see (page
47).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display Setting
"SEEK1" Tunes channels one after the other.
"SEEK2" Selects channels in memory one after
the other.