Kyocera Tempo E2000 - Manual (Page 79)

User Guide 71
15 V
OICE
C
OMMANDS
Voice command feature allows you to use voice
commands to call a contact, dial a phone number,
access menus, or find contact information from
your voice dial list.
Note: You cannot use voice recognition to end a
call; you must press the
End key when the flip is
open.
Voice dial list
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
Add contacts
To add a contact to your voice dial list:
1.
Select Menu > Contacts > Voice Dial List .
2. At the contact list, highlight a contact and
press the
OK key. A checkmark appears next
to a name when voice dialing is active.
Check each name you wish use with voice
dialing.
3. Select Save .
Remove contacts
To add a contact to your voice dial list:
1.
Select Menu > Contacts > Voice Dial List .
2. At the contact list, highlight a checkmarked
contact and press the
OK key. No checkmark
appears next to a name when voice dialing is
inactive.
Uncheck each name you wish remove from
voice dialing.
3. Select Save .
Voice commands
Start voice commands
1. Press the Call key to initiate voice
commands. The phone prompts, “Say a
commands”.
2. Say one of the following commands and
following the voice prompts.
– “
Contact ” call to a contact on
your voice dial list.
– “ Dial Number ” call by
speaking the digits of the phone number.
– “ ” sends you to a
menu item.
– “ Play ” play a playlist with the music
player.
– “ Find Contact ” allows you to find a
contact from your voice dial list.