Kyocera Tempo E2000 - Manual (Page 61)

User Guide 53
Voice Privacy
Set your phone to use enhanced digital CDMA
privacy. Select
Menu > Settings > Network >
Voice Privacy > Enhanced .
Data Setup
Set your phone’s connection type for data
applications.
Select
Menu > Settings > Network > Data Setup
and one of the following:
•
Automatic select the best connection type
based on your service.
• QNC Only allows only standard circuit-
switched calls.
• 1XRTT Only allows the use of high-speed
packet data.
User Name
Allows you to set a user name and password if
your phone is data enabled.
1.
Select Menu > Settings > Network > User
Name .
2. Enter or modify your user name. Select Next .
3. Enter or modify your password. Select Done .
Roaming Service Alert
Use this setting if you want the phone to alert you
when you roam outside of your home service
area.
Select Menu > Settings > Network > Roam/Svc
Alert and one of the following:
• Disabled turns roaming service alert off.
• When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
• On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
• On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Roam Option
You can restrict your phone from making a call
when roaming. Select
Menu > Settings >
Network > Roam Option > Automatic (allows
roaming) or No Roaming (disallows roaming).
Set Phone Line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number. Select
Menu >
Settings > Network > Set Phone Line and a
phone line.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,