Kyocera Tempo E2000 - Manual (Page 51)

User Guide 43
Select Menu > Settings > Bluetooth > On/Off
and one of the following:
•
On Visible allows other devices to find your
phone.
• On Invisible hides your phone for all devices
except those listed in your My Devices.
• Off prohibits your phone from being used
with any Bluetooth wireless technology device.
To prolong battery life, it is recommended to
turn Bluetooth off when you are not using it.
When you turn Bluetooth on the first time, you
will be prompted to do a device search. You can
immediately pair with a device.
Pairing
You must first “pair” your phone with the
Bluetooth device to allow your phone to
communicate with it. Refer to the instructions for
setting up Bluetooth (below) in conjunction with
the user guide provided with your Bluetooth
device.
1.
Select Menu > Settings > Bluetooth > On/
Off > On Visible or On Invisible .
2. Prepare the Bluetooth device or accessory
for pairing as described in the other device’s
user guide.
3. Select Menu > Settings > Bluetooth > My
Devices > Find New .
4. Your phone will search and detect visible
Bluetooth devices in the vicinity.
5. If devices are found, select Add to see the
list.
6. At the device list, highlight a device and
select
Add .
When pairing is initiated from another
Bluetooth device, you will be prompted to
accept or reject the pairing.
7. If necessary, enter the password provided in
the Bluetooth device’s user guide and select
OK .
Your phone waits for the device’s response.
If the password is accepted the device is
added to
My Devices .
Using Bluetooth
Before you can use the Bluetooth functions of
your phone, you must set your phone to be ready
to communicate with a device. This is called
“connecting.”
Connect to a device
To connect your phone to an audio Bluetooth
device:
1.
Select Menu > Settings > Bluetooth > My
Devices .
2. At the device list, highlight a device and
select
Connect .
A notification appears confirming the connection.
you can now use the device with your phone.