Marking the scenes, Returning to the scenes, Locating desired scene – Kodak SD-63HK User Manual
Page 27
27
Press MARKER during playback.
Select the blank Marker using
/
.
Then press ENTER at the desired scene.
Press MARKER to remove this display.
Marker 2
Marker 1
Marker 3
/Enter/Cancel/Marker
27
00
54
The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or
turn the power off.
• Some subtitles recorded around the marker may fail to
appear.
Marking the scenes
1
2
3
Press MARKER during playback or stop mode.
Press
/
to select the Marker 1 ~ 3.
Press ENTER.
Playback starts from the marked scene.
Marker 2
Marker 1
Marker 3
/Enter/Cancel/Marker
27
16
08
54
25
31
00
01
02
Returning to the scenes
1
2
3
To cancel the mark
Press CANCEL in step 2.
• To remove this display, press MARKER.
Use the title, chapter and time recorded on the disc to
locate the desired playback point.
Locating desired scene
Press number buttons (0–9) to change the
number.
Press JUMP during playback.
Press ENTER.
Playback starts.
Press
or
to select the “Time”, “Title” or
“Chapter”.
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
1
2
3
4
Marker 2
Marker 1
Marker 3
/Enter/Cancel/Marker
Marker 2
Marker 1
Marker 3
/Enter/Cancel/Marker
• Repeat this procedure to set the other 2
scenes.
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to
check the numbers.
• When you change the title, playback starts
from Chapter 1 of the selected title.
• Some discs may not be compatible with the
above operation.
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
12
2D20401A P24-31
26/9/03, 6:02 PM
27