Kenwood NEXEDGE NX-700H - Manual (Page 25)

9
■ Receiving
The icon will flash and a calling ID or text message will appear when a
Status call is received.
Press any key to return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack, or press and hold the key
programmed as Selcall, Status, or Selcall + Status to enter Stack mode.
• The last received message is displayed with the message number.
2 Press the / keys to select the desired message.
• Message types are identified as follows:
I: Caller ID
S: Status Message
M: Short Message
• You can change the displayed information by pressing and holding the key
for second. The display cycles as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp > ID Name ...
3 Press the key to return to normal operation.
• To delete the selected message, press the key or microphone # key. To
confirm the deletion, press the key or microphone key.
• To delete all messages, press and hold the key or microphone # key for
second. To confirm the deletion, press the key or microphone key.
S
horT
m
eSSAgeS
To send a short message, you must connect the transceiver to a PC. Ask your
dealer for details.
• Short messages can contain a maximum of 48 characters.
• Received short messages are displayed the same as Status messages and are
stored in the same stack memory. A combined maximum of 5 Status calls and short
messages can be stored in the stack memory.
l
ong
m
eSSAgeS
To send and receive long messages, you must connect the transceiver to a PC.
Ask your dealer for details.
• Long messages can contain a maximum of 4096 characters.
gpS r
eporT
To send your location data, you must first connect a GPS unit to the transceiver.
GPS data can be manually transmitted by pressing the key programmed as Send
the GPS data, or by accessing the Send the GPS data function through the Menu
{page 2}. If set up by your dealer, GPS data may be automatically transmitted at a
preset time interval.